Thanks to all the pilots who have submitted your airplane pics!
Here is a photo of my 1/4 scale BalsaUSA SPAD 13 on
its first flight which took place on Sept 14, 2010.
The airplane is covered with Solartex, weighs 20
pounds, and powered by a Fuji 34B gas engine.
The covering is painted with exterior latex paint and
a top coat of polyurethane.
The colors represent the French fighter group SPA86.
The number 13 aircraft is that of 1Lt G DeFreest Larner,
an American who flew with the French Escadrille who
transferred to the 103rd Fighter Squadron,
American Expeditionary Forces, when it entered the war.
Dennis S.
A photo of my 80" Grumman Widgeon powered with 2 OS .61. Scratch built from Sid Morgan plans. First flight was Oct 2008 (not from the pool). Successful but wild on very windy day. Second flight (2009) not quite successful and waiting for some minor repair.
Roy S.,
Deer Park, NY
Pic of my 2.6 Extra 260 from Comp arf. It was custom
painted by www.indocilart.com and appropriately named “out of control”.
It’s loaded with RTL fasteners. Tom H.
this is a photo of my A6M2-N Japanese Rufe. This was a two year scratch built project drawing up my own plans but using a set of plans for a later model land based A6M5 Zero by Ziroli as a reference.
Model has 100 inch wingspan, weight 32 lbs.. DA 85 engine and best of all for you... A ton of RTL fasteners were used to make it all work. :-). To buy several of your assortments was one of my best decisions I've made, now so many wasteful trips to search for the right nut/bolt etc. are a thing of the past!
Thank you!
Robert B
Howard N.
The picture is of me and my model tech "Avance". Michael W.
Tim S.

The one shown is a Yellow Aircraft P-47 bubble top. I got the kit on EBay and it was bare bones! No plans, or details of any sort. For flight controls, all I got was the skins for the rudder, elevator, and ailerons. I went on line on RC Universe and found two sets of plans for two different versions of the kit. It took well over a year to build, but I think it came out OK. It sure flies nice with a Moki 2.10! Use the photos as you see fit!
Joe L.
Smithfield, VA.

This is a Unionville Hobby 1/ 6 scale Radial Beaver with a 8 foot wing span.It has a O.S FS120S-E engine swinging a 16-6 Master Airscrew prop. It was built in2005 and is a excellent flyer.
Bill.

The photo of my plane is a modded Hangar 9 Cub 40. The trim scheme is of a full scale Cub. Mike



All of these builds have lot's of RTL nuts bolts and my most liked the 00 stainless sheetmetal screw. Thanks for what you do. Scott D.

Brian Charpentier

Here’s my entry photo. It’s a ¼ scale Lockheed Vega from my own plans.
Cheers, Nigel

Its a USRA Unlimited class Pylon Racer.
32 pounds without fuel aproximitly 1/5 scale 200CC Aerrow 200 converted to alcohol.
230 MPH (eagle tree flight data recored) 251 top speed recorded.
I use your parts to make me the fastest plane at the races.

3DHobbyShop Extra 330SC done up in a custom scheme of Mike
Goulian's Castrol Aviator. 105" span, powered by Desert Aircraft 120cc twin
cylinder. Lots of RTL fasteners in this one..servo screws, cowling,
spinner, etc.


I would like to enter my Rebuild of my wild hare Edge 540 in the Plane of
the month Contest..Blake B